|
XrangeSeriesAccessibility | Accessibility [get, set] |
| Accessibility options for a series. More...
|
|
bool | AllowPointSelect [get, set] |
| Allow this series' points to be selected by clicking on the graphic(columns, point markers, pie slices, map areas etc).The selected points can be handled by point select and unselectevents, or collectively by the getSelectedPoints function.And alternative way of selecting points is through dragging. More...
|
|
Animation | Animation [get, set] |
| Enable or disable the initial animation when a series is displayed.The animation can also be set as a configuration object. Pleasenote that this option only applies to the initial animation of theseries itself. For other animations, see chart.animation and the animation parameter under the API methods.The following properties are supported:- defer : The animation delay time in milliseconds.- duration : The duration of the animation in milliseconds. (Defaults to 1000 )- easing : Can be a string reference to an easing function set on the Math object or a function. See the Custom easing function demo below. (Defaults to easeInOutSine )Due to poor performance, animation is disabled in old IE browsersfor several chart types. More...
|
|
bool | AnimationBool [get, set] |
| Enable or disable the initial animation when a series is displayed.The animation can also be set as a configuration object. Pleasenote that this option only applies to the initial animation of theseries itself. For other animations, see chart.animation and the animation parameter under the API methods.The following properties are supported:- defer : The animation delay time in milliseconds.- duration : The duration of the animation in milliseconds. (Defaults to 1000 )- easing : Can be a string reference to an easing function set on the Math object or a function. See the Custom easing function demo below. (Defaults to easeInOutSine )Due to poor performance, animation is disabled in old IE browsersfor several chart types. More...
|
|
double | AnimationLimit [get, set] |
| For some series, there is a limit that shuts down animationby default when the total number of points in the chart is too high.For example, for a column chart and its derivatives, animation doesnot run if there is more than 250 points totally. To disable thiscap, set animationLimit to Infinity . This option works if animationis fired on individual points, not on a group of points like e.g. duringthe initial animation. More...
|
|
string | BorderColor [get, set] |
| The color of the border surrounding each column or bar.In styled mode, the border stroke can be set with the<tt>.highcharts-point rule. More...
|
|
Object | BorderRadius [get, set] |
| The corner radius of the border surrounding each column or bar. A numbersignifies pixels. A percentage string, like for example 50% , signifiesa relative size. For columns this is relative to the column width, forpies it is relative to the radius and the inner radius. More...
|
|
string | BorderRadiusString [get, set] |
| The corner radius of the border surrounding each column or bar. A numbersignifies pixels. A percentage string, like for example 50% , signifiesa relative size. For columns this is relative to the column width, forpies it is relative to the radius and the inner radius. More...
|
|
double | BorderRadiusNumber [get, set] |
| The corner radius of the border surrounding each column or bar. A numbersignifies pixels. A percentage string, like for example 50% , signifiesa relative size. For columns this is relative to the column width, forpies it is relative to the radius and the inner radius. More...
|
|
double | BorderWidth [get, set] |
| The width of the border surrounding each column or bar. Defaults to1 when there is room for a border, but to 0 when the columns areso dense that a border would cover the next column.In styled mode, the stroke width can be set with the<tt>.highcharts-point rule. More...
|
|
bool | CenterInCategory [get, set] |
| When true , the columns will center in the category, ignoring nullor missing points. When false , space will be reserved for null ormissing points. More...
|
|
string | ClassName [get, set] |
| An additional class name to apply to the series' graphical elements.This option does not replace default class names of the graphicalelement. Changes to the series' color will also be reflected in achart's legend and tooltip. More...
|
|
bool | Clip [get, set] |
| Disable this option to allow series rendering in the whole plottingarea.**Note:** Clipping should be always enabled whenchart.zoomType is set More...
|
|
string | Color [get, set] |
| The main color of the series. In line type series it applies to theline and the point markers unless otherwise specified. In bar typeseries it applies to the bars unless a color is specified per point.The default value is pulled from the options.colors array.In styled mode, the color can be defined by thecolorIndex option. Also, the seriescolor can be set with the .highcharts-series ,.highcharts-color-{n} , .highcharts-{type}-series or<tt>.highcharts-series-{n} class, or individual classes given by theclassName option. More...
|
|
string | ColorAxis [get, set] |
| When using dual or multiple color axes, this number defines whichcolorAxis the particular series is connected to. It refers toeither theidor the index of the axis in the colorAxis array, with 0 being thefirst. Set this option to false to prevent a series from connectingto the default color axis.Since v7.2.0 the option can also be an axis id or an axis indexinstead of a boolean flag. More...
|
|
double | ColorAxisNumber [get, set] |
| When using dual or multiple color axes, this number defines whichcolorAxis the particular series is connected to. It refers toeither theidor the index of the axis in the colorAxis array, with 0 being thefirst. Set this option to false to prevent a series from connectingto the default color axis.Since v7.2.0 the option can also be an axis id or an axis indexinstead of a boolean flag. More...
|
|
bool | ColorAxisBool [get, set] |
| When using dual or multiple color axes, this number defines whichcolorAxis the particular series is connected to. It refers toeither theidor the index of the axis in the colorAxis array, with 0 being thefirst. Set this option to false to prevent a series from connectingto the default color axis.Since v7.2.0 the option can also be an axis id or an axis indexinstead of a boolean flag. More...
|
|
bool | ColorByPoint [get, set] |
| When using automatic point colors pulled from the global[colors](colors) or series-specificplotOptions.column.colors collections, this optiondetermines whether the chart should receive one color per series orone color per point.In styled mode, the colors or series.colors arrays are notsupported, and instead this option gives the points individual colorclass names on the form highcharts-color-{n} . More...
|
|
double | ColorIndex [get, set] |
| Styled mode only. A specific color index to use for the series, so itsgraphic representations are given the class name highcharts-color-{n} .Since v11, CSS variables on the form --highcharts-color-{n} makechanging the color scheme very convenient. More...
|
|
string | ColorKey [get, set] |
| Determines what data value should be used to calculate point colorif colorAxis is used. Requires to set min and max if somecustom point property is used or if approximation for data groupingis set to ‘'sum’`. More...
|
|
List< string > | Colors [get, set] |
| A series specific or series type specific color set to apply insteadof the global colors when colorByPoint is true. More...
|
|
XrangeSeriesCursor | Cursor [get, set] |
| You can set the cursor to "pointer" if you have click events attachedto the series, to signal to the user that the points and lines canbe clicked.In styled mode, the series cursor can be set with the same classesas listed under series.color. More...
|
|
Hashtable | Custom [get, set] |
| A reserved subspace to store options and values for customizedfunctionality. Here you can add additional data for your own eventcallbacks and formatter callbacks. More...
|
|
XrangeSeriesDashStyle | DashStyle [get, set] |
| Name of the dash style to use for the graph, or for some series typesthe outline of each shape.In styled mode, thestroke dash-arraycan be set with the same classes as listed underseries.color. More...
|
|
List< XrangeSeriesData > | Data [get, set] |
| An array of data points for the series. For the xrange series type,points can be given in the following ways:1. An array of objects with named values. The objects are point configuration objects as seen below. js data: [{ x: Date.UTC(2017, 0, 1), x2: Date.UTC(2017, 0, 3), name: "Test", y: 0, color: "#00FF00" }, { x: Date.UTC(2017, 0, 4), x2: Date.UTC(2017, 0, 5), name: "Deploy", y: 1, color: "#FF0000" }] More...
|
|
XrangeSeriesDataLabels | DataLabels [get, set] |
| Options for the series data labels, appearing next to each datapoint.Since v6.2.0, multiple data labels can be applied to each singlepoint by defining them as an array of configs.In styled mode, the data labels can be styled with the<tt>.highcharts-data-label-box and .highcharts-data-label class names(see example). More...
|
|
string | Description [get, set] |
| A description of the series to add to the screen reader informationabout the series. More...
|
|
XrangeSeriesDragDrop | DragDrop [get, set] |
| The draggable-points module allows points to be moved around or modified inthe chart. In addition to the options mentioned under the dragDrop APIstructure, the module fires three events,point.dragStart,point.drag andpoint.drop. More...
|
|
bool | EnableMouseTracking [get, set] |
| Enable or disable the mouse tracking for a specific series. Thisincludes point tooltips and click events on graphs and points. Forlarge datasets it improves performance. More...
|
|
XrangeSeriesEvents | Events [get, set] |
| General event handlers for the series items. These event hooks canalso be attached to the series at run time using theHighcharts.addEvent function. More...
|
|
bool | Grouping [get, set] |
| Whether to group non-stacked columns or to let them renderindependent of each other. Non-grouped columns will be laid outindividually and overlap each other. More...
|
|
double | GroupPadding [get, set] |
| Padding between each value groups, in x axis units. More...
|
|
double | GroupZPadding [get, set] |
| The spacing between columns on the Z Axis in a 3D chart. More...
|
|
override string | Id [get, set] |
| An id for the series. This can be used after render time to get a pointerto the series object through chart.get() . More...
|
|
override string | Id_DefaultValue [get, set] |
|
bool | InactiveOtherPoints [get, set] |
| Highlight only the hovered point and fade the remaining points.Scatter-type series require enabling the 'inactive' marker state andadjusting opacity. Note that this approach could affect performancewith large datasets. More...
|
|
bool | IncludeInDataExport [get, set] |
| When set to false will prevent the series data from being included inany form of data export.Since version 6.0.0 until 7.1.0 the option was existing undocumentedas includeInCSVExport . More...
|
|
override double | Index [get, set] |
| The index of the series in the chart, affecting the internal index in thechart.series array, the visible Z index as well as the order in thelegend. More...
|
|
override double | Index_DefaultValue [get, set] |
|
List< string > | Keys [get, set] |
| An array specifying which option maps to which key in the data pointarray. This makes it convenient to work with unstructured data arraysfrom different sources. More...
|
|
XrangeSeriesLabel | Label [get, set] |
| Series labels are placed as close to the series as possible in anatural way, seeking to avoid other series. The goal of thisfeature is to make the chart more easily readable, like if ahuman designer placed the labels in the optimal position.The series labels currently work with series types having agraph or an area . More...
|
|
override double | LegendIndex [get, set] |
| The sequential index of the series in the legend. More...
|
|
override double | LegendIndex_DefaultValue [get, set] |
|
XrangeSeriesLegendSymbol | LegendSymbol [get, set] |
| What type of legend symbol to render for this series. Can be one ofareaMarker , lineMarker or rectangle . More...
|
|
string | LinkedTo [get, set] |
| The id of another series to link to. Additionally,the value can be ":previous" to link to the previous series. Whentwo series are linked, only the first one appears in the legend.Toggling the visibility of this also toggles the linked series.If master series uses data sorting and linked series does not haveits own sorting definition, the linked series will be sorted in thesame order as the master one. More...
|
|
double | MaxPointWidth [get, set] |
| The maximum allowed pixel width for a column, translated to theheight of a bar in a bar chart. This prevents the columns frombecoming too wide when there is a small number of points in thechart. More...
|
|
double | MinPointLength [get, set] |
| The minimal height for a column or width for a bar. By default,0 values are not shown. To visualize a 0 (or close to zero) point,set the minimal point length to a pixel value like 3. In stackedcolumn charts, minPointLength might not be respected for tightlypacked values. More...
|
|
override string | Name [get, set] |
| The name of the series as shown in the legend, tooltip etc. More...
|
|
override string | Name_DefaultValue [get, set] |
|
XrangeSeriesOnPoint | OnPoint [get, set] |
| Options for the Series on point feature. Only pie and sunburst seriesare supported at this moment. More...
|
|
double | Opacity [get, set] |
| Opacity of a series parts: line, fill (e.g. area) and dataLabels. More...
|
|
XrangeSeriesPartialFill | PartialFill [get, set] |
| A partial fill for each point, typically used to visualize how muchof a task is performed. The partial fill object can be set either onseries or point level. More...
|
|
XrangeSeriesPoint | Point [get, set] |
| Properties for each single point. More...
|
|
string | PointDescriptionFormat [get, set] |
| Same asaccessibility.point.descriptionFormat,but for an individual series. Overrides the chart wide configuration. More...
|
|
string | PointDescriptionFormatter [get, set] |
| Same asaccessibility.series.descriptionFormatter,but for an individual series. Overrides the chart wide configuration. More...
|
|
double | PointPadding [get, set] |
| Padding between each column or bar, in x axis units. More...
|
|
double | PointWidth [get, set] |
| A pixel value specifying a fixed width for each column or bar point.When set to undefined , the width is calculated from thepointPadding and groupPadding . The width effects the dimensionthat is not based on the point value. For column series it is thehoizontal length and for bar series it is the vertical length. More...
|
|
bool | RelativeXValue [get, set] |
| When true, X values in the data set are relative to the currentpointStart , pointInterval and pointIntervalUnit settings. Thisallows compression of the data for datasets with irregular X values.The real X values are computed on the formula f(x) = ax + b , wherea is the pointInterval (optionally with a time unit given bypointIntervalUnit ), and b is the pointStart . More...
|
|
bool | Selected [get, set] |
| Whether to select the series initially. If showCheckbox is true,the checkbox next to the series name in the legend will be checkedfor a selected series. More...
|
|
Shadow | Shadow [get, set] |
| Whether to apply a drop shadow to the graph line. Since 2.3 theshadow can be an object configuration containing color , offsetX ,offsetY , opacity and width .Note that in some cases, like stacked columns or other dense layouts, theseries may cast shadows on each other. In that case, thechart.seriesGroupShadow allows applying a common drop shadow to thewhole series group. More...
|
|
bool | ShadowBool [get, set] |
| Whether to apply a drop shadow to the graph line. Since 2.3 theshadow can be an object configuration containing color , offsetX ,offsetY , opacity and width .Note that in some cases, like stacked columns or other dense layouts, theseries may cast shadows on each other. In that case, thechart.seriesGroupShadow allows applying a common drop shadow to thewhole series group. More...
|
|
bool | ShowCheckbox [get, set] |
| If true, a checkbox is displayed next to the legend item to allowselecting the series. The state of the checkbox is determined bythe selected option. More...
|
|
bool | ShowInLegend [get, set] |
| Whether to display this particular series or series type in thelegend. Standalone series are shown in legend by default, and linkedseries are not. Since v7.2.0 it is possible to show series that usecolorAxis by setting this option to true . More...
|
|
bool | SkipKeyboardNavigation [get, set] |
| If set to true , the accessibility module will skip past the pointsin this series for keyboard navigation. More...
|
|
XrangeSeriesSonification | Sonification [get, set] |
| Sonification/audio chart options for a series. More...
|
|
override string | Stack [get, set] |
| This option allows grouping series in a stacked chart. The stack optioncan be a string or anything else, as long as the grouped series' stackoptions match each other after conversion into a string. More...
|
|
override string | Stack_DefaultValue [get, set] |
|
override double | StackNumber [get, set] |
| This option allows grouping series in a stacked chart. The stack optioncan be a string or anything else, as long as the grouped series' stackoptions match each other after conversion into a string. More...
|
|
override double | StackNumber_DefaultValue [get, set] |
|
XrangeSeriesStates | States [get, set] |
|
bool | StickyTracking [get, set] |
| Sticky tracking of mouse events. When true, the mouseOut event on aseries isn't triggered until the mouse moves over another series, orout of the plot area. When false, the mouseOut event on a series istriggered when the mouse leaves the area around the series' graph ormarkers. This also implies the tooltip when not shared. WhenstickyTracking is false and tooltip.shared is false, the tooltipwill be hidden when moving the mouse between series. Defaults to truefor line and area type series, but to false for columns, pies etc.**Note:** The boost module will force this option because oftechnical limitations. More...
|
|
XrangeSeriesTooltip | Tooltip [get, set] |
| A configuration object for the tooltip rendering of each singleseries. Properties are inherited from tooltip, but onlythe following properties can be defined on a series level. More...
|
|
double | TurboThreshold [get, set] |
| When a series contains a data array that is longer than this, onlyone dimensional arrays of numbers, or two dimensional arrays withx and y values are allowed. Also, only the first point is tested,and the rest are assumed to be the same format. This saves expensivedata checking and indexing in long series. Set it to 0 disable.Note:In boost mode turbo threshold is forced. Only array of numbers ortwo dimensional arrays are allowed. More...
|
|
bool | Visible [get, set] |
| Set the initial visibility of the series. More...
|
|
override string | XAxis [get, set] |
| When using dual or multiple x axes, this number defines which xAxis theparticular series is connected to. It refers to either theidor the index of the axis in the xAxis array, with 0 being the first. More...
|
|
override string | XAxis_DefaultValue [get, set] |
|
override double | XAxisNumber [get, set] |
| When using dual or multiple x axes, this number defines which xAxis theparticular series is connected to. It refers to either theidor the index of the axis in the xAxis array, with 0 being the first. More...
|
|
override double | XAxisNumber_DefaultValue [get, set] |
|
override string | YAxis [get, set] |
| When using dual or multiple y axes, this number defines which yAxis theparticular series is connected to. It refers to either theidor the index of the axis in the yAxis array, with 0 being the first. More...
|
|
override string | YAxis_DefaultValue [get, set] |
|
override double | YAxisNumber [get, set] |
| When using dual or multiple y axes, this number defines which yAxis theparticular series is connected to. It refers to either theidor the index of the axis in the yAxis array, with 0 being the first. More...
|
|
override double | YAxisNumber_DefaultValue [get, set] |
|
override double | ZIndex [get, set] |
| Define the visual z index of the series. More...
|
|
override double | ZIndex_DefaultValue [get, set] |
|
string | ZoneAxis [get, set] |
| Defines the Axis on which the zones are applied. More...
|
|
List< XrangeSeriesZone > | Zones [get, set] |
| An array defining zones within a series. Zones can be applied to theX axis, Y axis or Z axis for bubbles, according to the zoneAxis option. The zone definitions have to be in ascending order regardingto the value.In styled mode, the color zones are styled with the<tt>.highcharts-zone-{n} class, or custom classed from the className option(view live demo). More...
|
|
Hashtable | CustomFields [get, set] |
|
virtual string | Id [get, set] |
| An id for the series. This can be used after render time to get a pointerto the series object through chart.get() . More...
|
|
virtual string | Id_DefaultValue [get, set] |
|
virtual double | Index [get, set] |
| The index of the series in the chart, affecting the internal index in thechart.series array, the visible Z index as well as the order in thelegend. More...
|
|
virtual double | Index_DefaultValue [get, set] |
|
virtual double | LegendIndex [get, set] |
| The sequential index of the series in the legend. More...
|
|
virtual double | LegendIndex_DefaultValue [get, set] |
|
virtual string | Name [get, set] |
| The name of the series as shown in the legend, tooltip etc. More...
|
|
virtual string | Name_DefaultValue [get, set] |
|
virtual string | Stack [get, set] |
| This option allows grouping series in a stacked chart. The stack optioncan be a string or anything else, as long as the grouped series' stackoptions match each other after conversion into a string. More...
|
|
virtual string | Stack_DefaultValue [get, set] |
|
virtual double | StackNumber [get, set] |
| This option allows grouping series in a stacked chart. The stack optioncan be a string or anything else, as long as the grouped series' stackoptions match each other after conversion into a string. More...
|
|
virtual double | StackNumber_DefaultValue [get, set] |
|
virtual string | XAxis [get, set] |
| When using dual or multiple x axes, this number defines which xAxis theparticular series is connected to. It refers to either theidor the index of the axis in the xAxis array, with 0 being the first. More...
|
|
virtual string | XAxis_DefaultValue [get, set] |
|
virtual double | XAxisNumber [get, set] |
| When using dual or multiple x axes, this number defines which xAxis theparticular series is connected to. It refers to either theidor the index of the axis in the xAxis array, with 0 being the first. More...
|
|
virtual double | XAxisNumber_DefaultValue [get, set] |
|
virtual string | YAxis [get, set] |
| When using dual or multiple y axes, this number defines which yAxis theparticular series is connected to. It refers to either theidor the index of the axis in the yAxis array, with 0 being the first. More...
|
|
virtual string | YAxis_DefaultValue [get, set] |
|
virtual double | YAxisNumber [get, set] |
| When using dual or multiple y axes, this number defines which yAxis theparticular series is connected to. It refers to either theidor the index of the axis in the yAxis array, with 0 being the first. More...
|
|
virtual double | YAxisNumber_DefaultValue [get, set] |
|
virtual double | ZIndex [get, set] |
| Define the visual z index of the series. More...
|
|
virtual double | ZIndex_DefaultValue [get, set] |
|
Hashtable | CustomFields [get, set] |
|