Highcharts .NET  11.3.0
Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge Class Reference

Inherits BaseObject.

Properties

PlotOptionsSolidgaugeAccessibility Accessibility [get, set]
 Accessibility options for a series. More...
 
bool AllowPointSelect [get, set]
 Allow this series' points to be selected by clicking on the graphic(columns, point markers, pie slices, map areas etc).The selected points can be handled by point select and unselectevents, or collectively by the getSelectedPoints function.And alternative way of selecting points is through dragging. More...
 
Animation Animation [get, set]
 Enable or disable the initial animation when a series is displayed.The animation can also be set as a configuration object. Pleasenote that this option only applies to the initial animation of theseries itself. For other animations, see chart.animation and the animation parameter under the API methods.The following properties are supported:- defer: The animation delay time in milliseconds.- duration: The duration of the animation in milliseconds. (Defaults to 1000)- easing: Can be a string reference to an easing function set on the Math object or a function. See the Custom easing function demo below. (Defaults to easeInOutSine)Due to poor performance, animation is disabled in old IE browsersfor several chart types. More...
 
bool AnimationBool [get, set]
 Enable or disable the initial animation when a series is displayed.The animation can also be set as a configuration object. Pleasenote that this option only applies to the initial animation of theseries itself. For other animations, see chart.animation and the animation parameter under the API methods.The following properties are supported:- defer: The animation delay time in milliseconds.- duration: The duration of the animation in milliseconds. (Defaults to 1000)- easing: Can be a string reference to an easing function set on the Math object or a function. See the Custom easing function demo below. (Defaults to easeInOutSine)Due to poor performance, animation is disabled in old IE browsersfor several chart types. More...
 
string ClassName [get, set]
 An additional class name to apply to the series' graphical elements.This option does not replace default class names of the graphicalelement. Changes to the series' color will also be reflected in achart's legend and tooltip. More...
 
bool Clip [get, set]
 Disable this option to allow series rendering in the whole plottingarea.**Note:** Clipping should be always enabled whenchart.zoomType is set More...
 
string Color [get, set]
 The main color of the series. In line type series it applies to theline and the point markers unless otherwise specified. In bar typeseries it applies to the bars unless a color is specified per point.The default value is pulled from the options.colors array.In styled mode, the color can be defined by thecolorIndex option. Also, the seriescolor can be set with the .highcharts-series,.highcharts-color-{n}, .highcharts-{type}-series or<tt>.highcharts-series-{n} class, or individual classes given by theclassName option. More...
 
bool ColorByPoint [get, set]
 Whether to give each point an individual color. More...
 
double ColorIndex [get, set]
 Styled mode only. A specific color index to use for the series, so itsgraphic representations are given the class name highcharts-color-{n}.Since v11, CSS variables on the form --highcharts-color-{n} makechanging the color scheme very convenient. More...
 
bool Crisp [get, set]
 When true, each point or column edge is rounded to its nearest pixelin order to render sharp on screen. In some cases, when there are alot of densely packed columns, this leads to visible differencein column widths or distance between columns. In these cases,setting crisp to false may look better, even though each columnis rendered blurry. More...
 
PlotOptionsSolidgaugeCursor Cursor [get, set]
 You can set the cursor to "pointer" if you have click events attachedto the series, to signal to the user that the points and lines canbe clicked.In styled mode, the series cursor can be set with the same classesas listed under series.color. More...
 
Hashtable Custom [get, set]
 A reserved subspace to store options and values for customizedfunctionality. Here you can add additional data for your own eventcallbacks and formatter callbacks. More...
 
PlotOptionsSolidgaugeDataLabels DataLabels [get, set]
 
string Description [get, set]
 A description of the series to add to the screen reader informationabout the series. More...
 
bool EnableMouseTracking [get, set]
 Enable or disable the mouse tracking for a specific series. Thisincludes point tooltips and click events on graphs and points. Forlarge datasets it improves performance. More...
 
PlotOptionsSolidgaugeEvents Events [get, set]
 General event handlers for the series items. These event hooks canalso be attached to the series at run time using theHighcharts.addEvent function. More...
 
bool InactiveOtherPoints [get, set]
 Highlight only the hovered point and fade the remaining points.Scatter-type series require enabling the 'inactive' marker state andadjusting opacity. Note that this approach could affect performancewith large datasets. More...
 
bool IncludeInDataExport [get, set]
 When set to false will prevent the series data from being included inany form of data export.Since version 6.0.0 until 7.1.0 the option was existing undocumentedas includeInCSVExport. More...
 
string InnerRadius [get, set]
 The inner radius for points in a solid gauge. Can be given only inpercentage, either as a number or a string like "50%". More...
 
List< string > Keys [get, set]
 An array specifying which option maps to which key in the data pointarray. This makes it convenient to work with unstructured data arraysfrom different sources. More...
 
PlotOptionsSolidgaugeLabel Label [get, set]
 Series labels are placed as close to the series as possible in anatural way, seeking to avoid other series. The goal of thisfeature is to make the chart more easily readable, like if ahuman designer placed the labels in the optimal position.The series labels currently work with series types having agraph or an area. More...
 
PlotOptionsSolidgaugeLegendSymbol LegendSymbol [get, set]
 What type of legend symbol to render for this series. Can be one ofareaMarker, lineMarker or rectangle. More...
 
PlotOptionsSolidgaugeLinecap Linecap [get, set]
 Whether the strokes of the solid gauge should be round or square. More...
 
double LineWidth [get, set]
 Pixel width of the graph line. More...
 
string LinkedTo [get, set]
 The id of another series to link to. Additionally,the value can be ":previous" to link to the previous series. Whentwo series are linked, only the first one appears in the legend.Toggling the visibility of this also toggles the linked series.If master series uses data sorting and linked series does not haveits own sorting definition, the linked series will be sorted in thesame order as the master one. More...
 
PlotOptionsSolidgaugeOnPoint OnPoint [get, set]
 Options for the Series on point feature. Only pie and sunburst seriesare supported at this moment. More...
 
double Opacity [get, set]
 Opacity of a series parts: line, fill (e.g. area) and dataLabels. More...
 
double Overshoot [get, set]
 Allow the gauge to overshoot the end of the perimeter axis by thismany degrees. Say if the gauge axis goes from 0 to 60, a value of100, or 1000, will show 5 degrees beyond the end of the axis when thisoption is set to 5. More...
 
PlotOptionsSolidgaugePoint Point [get, set]
 Properties for each single point. More...
 
string PointDescriptionFormat [get, set]
 Same asaccessibility.point.descriptionFormat,but for an individual series. Overrides the chart wide configuration. More...
 
string PointDescriptionFormatter [get, set]
 Same asaccessibility.series.descriptionFormatter,but for an individual series. Overrides the chart wide configuration. More...
 
double PointInterval [get, set]
 If no x values are given for the points in a series, pointIntervaldefines the interval of the x values. For example, if a seriescontains one value every decade starting from year 0, setpointInterval to 10. In true datetime axes, the pointIntervalis set in milliseconds.It can be also be combined with pointIntervalUnit to draw irregulartime intervals.If combined with relativeXValue, an x value can be set on eachpoint, and the pointInterval is added x times to the pointStartsetting.Please note that this options applies to the series data, not theinterval of the axis ticks, which is independent. More...
 
PlotOptionsSolidgaugePointIntervalUnit PointIntervalUnit [get, set]
 On datetime series, this allows for setting thepointInterval to irregular timeunits, day, month and year. A day is usually the same as 24hours, but pointIntervalUnit also takes the DST crossover intoconsideration when dealing with local time. Combine this option withpointInterval to draw weeks, quarters, 6 months, 10 years etc.Please note that this options applies to the series data, not theinterval of the axis ticks, which is independent. More...
 
double PointStart [get, set]
 If no x values are given for the points in a series, pointStartdefines on what value to start. For example, if a series contains oneyearly value starting from 1945, set pointStart to 1945.If combined with relativeXValue, an x value can be set on eachpoint. The x value from the point options is multiplied bypointInterval and added to pointStart to produce a modified xvalue. More...
 
string Radius [get, set]
 The outer radius for points in a solid gauge. Can be given only inpercentage, either as a number or a string like "100%". More...
 
bool RelativeXValue [get, set]
 When true, X values in the data set are relative to the currentpointStart, pointInterval and pointIntervalUnit settings. Thisallows compression of the data for datasets with irregular X values.The real X values are computed on the formula f(x) = ax + b, wherea is the pointInterval (optionally with a time unit given bypointIntervalUnit), and b is the pointStart. More...
 
bool Rounded [get, set]
 Whether to draw rounded edges on the gauge. This options adds the radiusof the rounding to the ends of the arc, so it extends past the actualvalues. When borderRadius is set, it takes precedence over rounded. AborderRadius of 50% behaves like rounded, except the shape is notextended past its value. More...
 
bool Selected [get, set]
 Whether to select the series initially. If showCheckbox is true,the checkbox next to the series name in the legend will be checkedfor a selected series. More...
 
bool ShowCheckbox [get, set]
 If true, a checkbox is displayed next to the legend item to allowselecting the series. The state of the checkbox is determined bythe selected option. More...
 
bool ShowInLegend [get, set]
 Whether to display this particular series or series type in thelegend. Standalone series are shown in legend by default, and linkedseries are not. Since v7.2.0 it is possible to show series that usecolorAxis by setting this option to true. More...
 
bool SkipKeyboardNavigation [get, set]
 If set to true, the accessibility module will skip past the pointsin this series for keyboard navigation. More...
 
PlotOptionsSolidgaugeSonification Sonification [get, set]
 Sonification/audio chart options for a series. More...
 
bool StickyTracking [get, set]
 Sticky tracking of mouse events. When true, the mouseOut event on aseries isn't triggered until the mouse moves over another series, orout of the plot area. When false, the mouseOut event on a series istriggered when the mouse leaves the area around the series' graph ormarkers. This also implies the tooltip when not shared. WhenstickyTracking is false and tooltip.shared is false, the tooltipwill be hidden when moving the mouse between series. Defaults to truefor line and area type series, but to false for columns, pies etc.**Note:** The boost module will force this option because oftechnical limitations. More...
 
double Threshold [get, set]
 The threshold or base level for the gauge. More...
 
PlotOptionsSolidgaugeTooltip Tooltip [get, set]
 A configuration object for the tooltip rendering of each singleseries. Properties are inherited from tooltip, but onlythe following properties can be defined on a series level. More...
 
bool UseOhlcData [get, set]
 The parameter allows setting line series type and use OHLC indicators.Data in OHLC format is required. More...
 
bool Visible [get, set]
 Set the initial visibility of the series. More...
 
Hashtable CustomFields [get, set]
 

Property Documentation

◆ Accessibility

PlotOptionsSolidgaugeAccessibility Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.Accessibility
getset

Accessibility options for a series.

◆ AllowPointSelect

bool Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.AllowPointSelect
getset

Allow this series' points to be selected by clicking on the graphic(columns, point markers, pie slices, map areas etc).The selected points can be handled by point select and unselectevents, or collectively by the getSelectedPoints function.And alternative way of selecting points is through dragging.

◆ Animation

Animation Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.Animation
getset

Enable or disable the initial animation when a series is displayed.The animation can also be set as a configuration object. Pleasenote that this option only applies to the initial animation of theseries itself. For other animations, see chart.animation and the animation parameter under the API methods.The following properties are supported:- defer: The animation delay time in milliseconds.- duration: The duration of the animation in milliseconds. (Defaults to 1000)- easing: Can be a string reference to an easing function set on the Math object or a function. See the Custom easing function demo below. (Defaults to easeInOutSine)Due to poor performance, animation is disabled in old IE browsersfor several chart types.

◆ AnimationBool

bool Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.AnimationBool
getset

Enable or disable the initial animation when a series is displayed.The animation can also be set as a configuration object. Pleasenote that this option only applies to the initial animation of theseries itself. For other animations, see chart.animation and the animation parameter under the API methods.The following properties are supported:- defer: The animation delay time in milliseconds.- duration: The duration of the animation in milliseconds. (Defaults to 1000)- easing: Can be a string reference to an easing function set on the Math object or a function. See the Custom easing function demo below. (Defaults to easeInOutSine)Due to poor performance, animation is disabled in old IE browsersfor several chart types.

◆ ClassName

string Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.ClassName
getset

An additional class name to apply to the series' graphical elements.This option does not replace default class names of the graphicalelement. Changes to the series' color will also be reflected in achart's legend and tooltip.

◆ Clip

bool Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.Clip
getset

Disable this option to allow series rendering in the whole plottingarea.**Note:** Clipping should be always enabled whenchart.zoomType is set

◆ Color

string Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.Color
getset

The main color of the series. In line type series it applies to theline and the point markers unless otherwise specified. In bar typeseries it applies to the bars unless a color is specified per point.The default value is pulled from the options.colors array.In styled mode, the color can be defined by thecolorIndex option. Also, the seriescolor can be set with the .highcharts-series,.highcharts-color-{n}, .highcharts-{type}-series or<tt>.highcharts-series-{n} class, or individual classes given by theclassName option.

◆ ColorByPoint

bool Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.ColorByPoint
getset

Whether to give each point an individual color.

◆ ColorIndex

double Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.ColorIndex
getset

Styled mode only. A specific color index to use for the series, so itsgraphic representations are given the class name highcharts-color-{n}.Since v11, CSS variables on the form --highcharts-color-{n} makechanging the color scheme very convenient.

◆ Crisp

bool Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.Crisp
getset

When true, each point or column edge is rounded to its nearest pixelin order to render sharp on screen. In some cases, when there are alot of densely packed columns, this leads to visible differencein column widths or distance between columns. In these cases,setting crisp to false may look better, even though each columnis rendered blurry.

◆ Cursor

PlotOptionsSolidgaugeCursor Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.Cursor
getset

You can set the cursor to "pointer" if you have click events attachedto the series, to signal to the user that the points and lines canbe clicked.In styled mode, the series cursor can be set with the same classesas listed under series.color.

◆ Custom

Hashtable Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.Custom
getset

A reserved subspace to store options and values for customizedfunctionality. Here you can add additional data for your own eventcallbacks and formatter callbacks.

◆ DataLabels

PlotOptionsSolidgaugeDataLabels Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.DataLabels
getset

◆ Description

string Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.Description
getset

A description of the series to add to the screen reader informationabout the series.

◆ EnableMouseTracking

bool Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.EnableMouseTracking
getset

Enable or disable the mouse tracking for a specific series. Thisincludes point tooltips and click events on graphs and points. Forlarge datasets it improves performance.

◆ Events

PlotOptionsSolidgaugeEvents Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.Events
getset

General event handlers for the series items. These event hooks canalso be attached to the series at run time using theHighcharts.addEvent function.

◆ InactiveOtherPoints

bool Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.InactiveOtherPoints
getset

Highlight only the hovered point and fade the remaining points.Scatter-type series require enabling the 'inactive' marker state andadjusting opacity. Note that this approach could affect performancewith large datasets.

◆ IncludeInDataExport

bool Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.IncludeInDataExport
getset

When set to false will prevent the series data from being included inany form of data export.Since version 6.0.0 until 7.1.0 the option was existing undocumentedas includeInCSVExport.

◆ InnerRadius

string Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.InnerRadius
getset

The inner radius for points in a solid gauge. Can be given only inpercentage, either as a number or a string like "50%".

◆ Keys

List<string> Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.Keys
getset

An array specifying which option maps to which key in the data pointarray. This makes it convenient to work with unstructured data arraysfrom different sources.

◆ Label

PlotOptionsSolidgaugeLabel Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.Label
getset

Series labels are placed as close to the series as possible in anatural way, seeking to avoid other series. The goal of thisfeature is to make the chart more easily readable, like if ahuman designer placed the labels in the optimal position.The series labels currently work with series types having agraph or an area.

◆ LegendSymbol

PlotOptionsSolidgaugeLegendSymbol Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.LegendSymbol
getset

What type of legend symbol to render for this series. Can be one ofareaMarker, lineMarker or rectangle.

◆ Linecap

PlotOptionsSolidgaugeLinecap Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.Linecap
getset

Whether the strokes of the solid gauge should be round or square.

◆ LineWidth

double Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.LineWidth
getset

Pixel width of the graph line.

◆ LinkedTo

string Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.LinkedTo
getset

The id of another series to link to. Additionally,the value can be ":previous" to link to the previous series. Whentwo series are linked, only the first one appears in the legend.Toggling the visibility of this also toggles the linked series.If master series uses data sorting and linked series does not haveits own sorting definition, the linked series will be sorted in thesame order as the master one.

◆ OnPoint

PlotOptionsSolidgaugeOnPoint Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.OnPoint
getset

Options for the Series on point feature. Only pie and sunburst seriesare supported at this moment.

◆ Opacity

double Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.Opacity
getset

Opacity of a series parts: line, fill (e.g. area) and dataLabels.

◆ Overshoot

double Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.Overshoot
getset

Allow the gauge to overshoot the end of the perimeter axis by thismany degrees. Say if the gauge axis goes from 0 to 60, a value of100, or 1000, will show 5 degrees beyond the end of the axis when thisoption is set to 5.

◆ Point

PlotOptionsSolidgaugePoint Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.Point
getset

Properties for each single point.

◆ PointDescriptionFormat

string Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.PointDescriptionFormat
getset

Same asaccessibility.point.descriptionFormat,but for an individual series. Overrides the chart wide configuration.

◆ PointDescriptionFormatter

string Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.PointDescriptionFormatter
getset

Same asaccessibility.series.descriptionFormatter,but for an individual series. Overrides the chart wide configuration.

◆ PointInterval

double Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.PointInterval
getset

If no x values are given for the points in a series, pointIntervaldefines the interval of the x values. For example, if a seriescontains one value every decade starting from year 0, setpointInterval to 10. In true datetime axes, the pointIntervalis set in milliseconds.It can be also be combined with pointIntervalUnit to draw irregulartime intervals.If combined with relativeXValue, an x value can be set on eachpoint, and the pointInterval is added x times to the pointStartsetting.Please note that this options applies to the series data, not theinterval of the axis ticks, which is independent.

◆ PointIntervalUnit

PlotOptionsSolidgaugePointIntervalUnit Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.PointIntervalUnit
getset

On datetime series, this allows for setting thepointInterval to irregular timeunits, day, month and year. A day is usually the same as 24hours, but pointIntervalUnit also takes the DST crossover intoconsideration when dealing with local time. Combine this option withpointInterval to draw weeks, quarters, 6 months, 10 years etc.Please note that this options applies to the series data, not theinterval of the axis ticks, which is independent.

◆ PointStart

double Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.PointStart
getset

If no x values are given for the points in a series, pointStartdefines on what value to start. For example, if a series contains oneyearly value starting from 1945, set pointStart to 1945.If combined with relativeXValue, an x value can be set on eachpoint. The x value from the point options is multiplied bypointInterval and added to pointStart to produce a modified xvalue.

◆ Radius

string Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.Radius
getset

The outer radius for points in a solid gauge. Can be given only inpercentage, either as a number or a string like "100%".

◆ RelativeXValue

bool Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.RelativeXValue
getset

When true, X values in the data set are relative to the currentpointStart, pointInterval and pointIntervalUnit settings. Thisallows compression of the data for datasets with irregular X values.The real X values are computed on the formula f(x) = ax + b, wherea is the pointInterval (optionally with a time unit given bypointIntervalUnit), and b is the pointStart.

◆ Rounded

bool Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.Rounded
getset

Whether to draw rounded edges on the gauge. This options adds the radiusof the rounding to the ends of the arc, so it extends past the actualvalues. When borderRadius is set, it takes precedence over rounded. AborderRadius of 50% behaves like rounded, except the shape is notextended past its value.

◆ Selected

bool Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.Selected
getset

Whether to select the series initially. If showCheckbox is true,the checkbox next to the series name in the legend will be checkedfor a selected series.

◆ ShowCheckbox

bool Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.ShowCheckbox
getset

If true, a checkbox is displayed next to the legend item to allowselecting the series. The state of the checkbox is determined bythe selected option.

◆ ShowInLegend

bool Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.ShowInLegend
getset

Whether to display this particular series or series type in thelegend. Standalone series are shown in legend by default, and linkedseries are not. Since v7.2.0 it is possible to show series that usecolorAxis by setting this option to true.

◆ SkipKeyboardNavigation

bool Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.SkipKeyboardNavigation
getset

If set to true, the accessibility module will skip past the pointsin this series for keyboard navigation.

◆ Sonification

PlotOptionsSolidgaugeSonification Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.Sonification
getset

Sonification/audio chart options for a series.

◆ StickyTracking

bool Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.StickyTracking
getset

Sticky tracking of mouse events. When true, the mouseOut event on aseries isn't triggered until the mouse moves over another series, orout of the plot area. When false, the mouseOut event on a series istriggered when the mouse leaves the area around the series' graph ormarkers. This also implies the tooltip when not shared. WhenstickyTracking is false and tooltip.shared is false, the tooltipwill be hidden when moving the mouse between series. Defaults to truefor line and area type series, but to false for columns, pies etc.**Note:** The boost module will force this option because oftechnical limitations.

◆ Threshold

double Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.Threshold
getset

The threshold or base level for the gauge.

◆ Tooltip

PlotOptionsSolidgaugeTooltip Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.Tooltip
getset

A configuration object for the tooltip rendering of each singleseries. Properties are inherited from tooltip, but onlythe following properties can be defined on a series level.

◆ UseOhlcData

bool Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.UseOhlcData
getset

The parameter allows setting line series type and use OHLC indicators.Data in OHLC format is required.

◆ Visible

bool Highsoft.Web.Mvc.Charts.PlotOptionsSolidgauge.Visible
getset

Set the initial visibility of the series.


The documentation for this class was generated from the following file: